Safety Manual#

Note

Document header

[Your Module Name] Safety Manual		status: draft security: NO safety: ASIL_B
tags: template realizes: wp__module_safety_manual

doc__module_name_safety_manual		Generic Document

Attention

The above directive must be updated according to your Module.

Modify Your Module Name to be your Module Name or put “Platform”
Modify id to be your Module Name in upper snake case preceded by doc__ and succeeded by safety_manual
Adjust status to be valid
Adjust safety and tags according to your needs

Introduction/Scope#

Assumed Platform Safety Requirements#

For the <Project platform / module name> the following safety related stakeholder requirements are assumed to define the top level functionality (purpose) of the <Project platform / module name>. I.e. from these all the feature and component requirements implemented are derived.

Assumptions of Use#

Assumptions on the Environment#

Generally the assumption of the project platform SEooC is that it is integrated in a safe system, i.e. the POSIX OS it runs on is qualified and also the HW related failures are taken into account by the system integrator, if not otherwise stated in the module’s safety concept.

List of AoUs expected from the environment the platform / module runs on:

Title	ID	Status
Another Title	aou_req__component_name__another_title	invalid

Assumptions on the User#

As there is no assumption on which specific OS and HW is used, the integration testing of the stakeholder and feature requirements is expected to be performed by the user of the platform SEooC. Tests covering all stakeholder and feature requirements performed on a reference platform (tbd link to reference platform specification), reviewed and passed are included in the platform SEooC safety package.
Additionally the components of the platform may have additional specific assumptions how they are used. These are part of every module documentation: <link to add>. Assumptions from components to their users can be fulfilled in two ways:
1. There are assumption which need to be fulfilled by all SW components, e.g. “every user of an IPC mechanism needs to make sure that he provides correct data (including appropriate ASIL level)” - in this case the AoU is marked as “platform”.
2. There are assumption which can be fulfilled by a safety mechanism realized by some other project platform component and are therefore not relevant for an user who uses the whole platform. But those are relevant if you chose to use the module SEooC stand-alone - in this case the AoU is marked as “module”. An example would be the “JSON read” which requires “The user shall provide a string as input which is not corrupted due to HW or QM SW errors.” - which is covered when using together with safe project platform persistency feature.

List of AoUs on the user of the platform or the module of this safety manual:

Note: Platform safety manual collects all platform wide AoU (have to be fulfilled by the user for any feature). Module safety manual collects all AoUs specific to a feature and its realizing components. This means for every feature the user selects, the platform safety manual and the related module manual has to be considered.

Title	ID	Status
Next Title	aou_req__component_name__next_title	invalid
Some Other Title	aou_req__feature_name__some_other_title	invalid

Safety concept of the SEooC#

Safety Anomalies#

Anomalies (bugs in ASIL SW, detected by testing or by users, which could not be fixed) known before release are documented in the platform/module release notes <add link to release note>.

References#